1. El
gancho should be manufactured by a formal professional factory in accordance with the technical conditions and safety specifications of the gancho, and the product should have the quality certificate of the manufacturer, otherwise it is not allowed to be used.
2. The new gancho should be subjected to a load test, and the opening of the measuring gancho should not exceed 0.25% of the original opening.
3.During use, check whether the gancho is cracked or severely deformed, corroded and worn.
4. El
ganchodebe probarse una vez al año. Durante la prueba, realice una prueba estática de 1,25 veces la carga de trabajo permitida durante 10 minutos y verifique con una lupa u otros métodos. No debe haber grietas, grietas ni deformaciones residuales.
5. Las tres secciones peligrosas deben limpiarse con queroseno. Use una lupa para ver si hay grietas. Para plato
ganchos, compruebe si los casquillos y los pasadores están desgastados.
6. Defects on the gancho shall not be repaired.